Laser
Cut 10 Gage Steel Plate and Formed to Shape for Accuracy and Strength.
160 STEEL BALL BEARINGS for NO
Vibration and LIFETIME Wear. NOT
The European Construction with PLASTIC SKID PLATES that
Wear Out.
3/8 X 2 inches Machined Center with Center Passage of 1.5 inches for Wire Loom and Plugs.
Adjustable sprinter swivel tension
Tested to
Comply with DOT FMVSS
207 Safety Standards per
sections S4.2, S4.3.
Easy Installation with
Instructions.
Manufactured and sold with USA Pricing.
Over 52 Years In Seat Manufacturing With Installation Assistance
Your Factory Direct Source for promaster seat swivels . ALL Swivel Costs Entered Are to Manufacture the Best Product . NO Middle Man Profits . No Import Duties . No Ocean Freight . 100 Percent Made in the USA
PROMASTER
SEAT
Promaster
MAX Swivel
SUPERIOR
NEW
DESIGN
Manufactured Specifically for the Promaster
With Mount Holes Specific ONLY for Promaster
NOT Multiple Side Holes
that TAKE AWAY the integrity.
IN STOCK
FACTORY SEAT on Factory Base
Large Wire Pass-Thru Center
Top
Bolt Pattern
16 1/8 x 13 1/4 & 15
1/4"
Bottom
bolt pattern
16 1/8 x 13 1/4 & 15
1/4"
Seat
raise 1.5"
Approved
for seats
without air bags.
Seat
bases tested to meet
FMVSS #207 safety
standards per sections
S4.2 and S4.3
Easy
Bolt in Installation.
OUR
SEAT
Promaster
MAX Swivel
SUPERIOR
NEW
DESIGN
Manufactured Specifically for the Promaster
With Mount Holes Specific ONLY for Promaster
NOT Multiple Side Holes
that TAKE AWAY the integrity.
OUR SEAT on Factory Base
Large Wire Pass-Thru Center
Top
Bolt Pattern
14 x 11"
Bottom
bolt pattern
16 1/8 x 13 1/4 & 15
1/4"
Seat
raise 1 5/8"
Approved
for seats
without air bags.
Seat
bases tested to meet
FMVSS #207 safety
standards per sections
S4.2 and S4.3
Easy
Bolt in Installation.
PROMASTER
SEAT
2
Inch Lower Base
IN STOCK
Stock
Seat on
2 Inch Lower Base
3 bolt
set in each slide.
Top
Bolt Pattern
16 1/8 x 13 1/4 & 15
1/4""
Includes
Belt Attachment
Made
to US DOT Standards in
the
US Base Design.
Seat
bases tested to meet
FMVSS #207 safety
standards
per sections
S4.2 and S4.3
Easy
Bolt in Installation.
OUR
SEAT
2
Inch Lower Base
When Changing to
Our
Seat
on
2 Inch Lower Base
3 bolt
set in each slide.
Top
Bolt Pattern
8 x 11""
Includes
Belt Attachment
Made
to US DOT Standards in
the
US Base Design.
Seat
bases tested to meet
FMVSS #207 safety
standards
per sections
S4.2 and S4.3
Easy
Bolt in Installation.
PROMASTER
SEAT
4
Inch Lower Base
IN STOCK
When Changing to
Our
Seat
on
4 Inch Lower Base
3 bolt
set in each slide.
16 1/8 x 13 1/4 x 15 1/4
Made
to US DOT Standards in
the
US Base Design.
Seat
bases tested to meet
FMVSS #207 safety
standards
per sections
S4.2 and S4.3
Easy
Bolt in Installation.
OUR
SEAT
4
Inch Lower Base
When Changing to
Our
Seat
on
4 Inch Lower Base
3 bolt
set in each slide.
Top
Bolt Pattern
8 x 11""
Includes
Belt Attachment
Made
to US DOT Standards in
the
US Base Design.
Seat
bases tested to meet
FMVSS #207 safety
standards
per sections
S4.2 and S4.3
Easy
Bolt in Installation.
PROMASTER
SEAT
Stock
Height-Base,Swivel
SUPERIOR
NEW
DESIGN
Manufactured Specifically for the Promaster
With Mount Holes Specific ONLY for Promaster
NOT Multiple Side Holes
that TAKE AWAY the integrity.
IN STOCK
Stock
Seat on
Sock Height Base-Swivel
3 bolt
set in each slide.
Top
Bolt Pattern
16 1/8 x 13 1/4 & 15
1/4""
Includes
Belt Attachment
Made
to US DOT Standards in
the
US Base Design.
Seat
bases tested to meet
FMVSS #207 safety
standards
per sections
S4.2 and S4.3
Easy
Bolt in Installation.
OUR SEAT
Stock
Height-Base,Swivel
SUPERIOR
NEW
DESIGN
Manufactured Specifically for the Promaster
With Mount Holes Specific ONLY for Promaster
NOT Multiple Side Holes
that TAKE AWAY the integrity.
When Changing to
Our
Seat on
Stock Height Base-Swivel
3 bolt
set in each slide.
Top
Bolt Pattern
14 x 11""
Includes
Belt Attachment
Made
to US DOT Standards in
the
US Base Design.
Seat
bases tested to meet
FMVSS #207 safety
standards
per sections
S4.2 and S4.3
Easy
Bolt in Installation.
PROMASTER
SEAT
2 Inch Lower-Base,Swivel
SUPERIOR
NEW
DESIGN
Manufactured Specifically for the Promaster
With Mount Holes Specific ONLY for Promaster
NOT Multiple Side Holes
that TAKE AWAY the integrity.
IN STOCK
Stock
Seat on Sock
Height Base And Swivel
3 bolt
set in each slide.
Top
Bolt Pattern
16 1/8 x 13 1/4 & 15
1/4""
Includes
Belt Attachment
Made
to US DOT Standards in
the
US Base Design.
Seat
bases tested to meet
FMVSS #207 safety
standards
per sections
S4.2 and S4.3
Easy
Bolt in Installation.
OUR SEAT
2 Inch Lower-Base,Swivel
SUPERIOR
NEW
DESIGN
When Changing to Our
Seat on
2 Inch Lower Base And Swivel
3 bolt
set in each slide.
Top
Bolt Pattern
14 x 11"
Includes
Belt Attachment
Made
to US DOT Standards in
the
US Base Design.
Seat
bases tested to meet
FMVSS #207 safety
standards
per sections
S4.2 and S4.3
Easy
Bolt in Installation.
PROMASTER
SEAT
Stock
Height
Power Base
SUPERIOR
NEW
DESIGN
Manufactured Specifically for the Promaster
With Mount Holes Specific ONLY for Promaster
NOT Multiple Side Holes
that TAKE AWAY the integrity.
Stock
Seat on Sock Height Power Base
3 bolt
set in each slide.
Top
Bolt Pattern
16 1/8 x 13 1/4 & 15
1/4""
Includes
Belt Attachment
Made
to US DOT Standards in
the
US Base Design.
Seat
bases tested to meet
FMVSS #207 safety
standards
per sections
S4.2 and S4.3
Easy
Bolt in Installation.
OUR
SEAT
Stock
Height
Power Base
SUPERIOR
NEW
DESIGN
Manufactured Specifically for the Promaster
With Mount Holes Specific ONLY for Promaster
NOT Multiple Side Holes
that TAKE AWAY the integrity.
IN STOCK
Our
Seat on Stock Height Power
Power Base
3 bolt
set in each slide.
Top
Bolt Pattern
16 1/8 x 13 1/4 & 15
1/4""
Includes
Belt Attachment
Made
to US DOT Standards in
the
US Base Design.
Seat
bases tested to meet
FMVSS #207 safety
standards
per sections
S4.2 and S4.3
Easy
Bolt in Installation.
PROMASTER SEAT
2 Inch Lower
Power Base
SUPERIOR
NEW
DESIGN
Manufactured Specifically for the Promaster
With Mount Holes Specific ONLY for Promaster
NOT Multiple Side Holes
that TAKE AWAY the integrity.
When Changing to
Our
Seat on
Stock Height Base-Swivel
3 bolt
set in each slide.
Top
Bolt Pattern
14 x 11""
Includes
Belt Attachment
Made
to US DOT Standards in
the
US Base Design.
Seat
bases tested to meet
FMVSS #207 safety
standards
per sections
S4.2 and S4.3
Easy
Bolt in Installation.
OUR
SEAT
2 Inch Lower
Power Base
SUPERIOR
NEW
DESIGN
Manufactured Specifically for the Promaster
With Mount Holes Specific ONLY for Promaster
NOT Multiple Side Holes
that TAKE AWAY the integrity.
Stock
Seat At
2 Inch Lower Power Base
3 bolt
set in each slide.
Top
Bolt Pattern
16 1/8 x 13 1/4 & 15
1/4""
Includes
Belt Attachment
Made
to US DOT Standards in
the
US Base Design.
Seat
bases tested to meet
FMVSS #207 safety
standards
per sections
S4.2 and S4.3
Easy
Bolt in Installation.
PROMASTER
SEAT
Stock Height
Power Base-Swivel
SUPERIOR
NEW
DESIGN
Manufactured Specifically for the Promaster
With Mount Holes Specific ONLY for Promaster
NOT Multiple Side Holes
that TAKE AWAY the integrity.
Stock
Seat on Sock Height Base With Swivel
3 bolt
set in each slide.
Top
Bolt Pattern
16 1/8 x 13 1/4 & 15
1/4""
Includes
Belt Attachment
Made
to US DOT Standards in
the
US Base Design.
Seat
bases tested to meet
FMVSS #207 safety
standards
per sections
S4.2 and S4.3
Easy
Bolt in Installation.
OUR SEAT
Stock Height
Power Base-Swivel
SUPERIOR
NEW
DESIGN
Manufactured Specifically for the Promaster
With Mount Holes Specific ONLY for Promaster
NOT Multiple Side Holes
that TAKE AWAY the integrity.
IN STOCK
Our
Seat on Stock
Base With Swivel
3 bolt
set in each slide.
Top
Bolt Pattern
14 x 11,13 1/4 & 15
1/4""
Includes
Belt Attachment
Made
to US DOT Standards in
the
US Base Design.
Seat
bases tested to meet
FMVSS #207 safety
standards
per sections
S4.2 and S4.3
Easy
Bolt in Installation.
Laser
Cut 10 Gage Steel Plate and Formed to Shape for Accuracy and Strength.
160 Steel
Ball Bearing Trace for NO
Vibration and LIFETIME Wear. Not
The European Construction with a Few Nylon Glides or Rollers that
Wear Out.
3/8 X 2 inches CNC Machined Center with Center Passage of 1.5 inches for Wire Loom and Plugs.
Adjustable promaster swivel tension
Available
for Factory and After Market
Seating.
Tested to
Comply with DOT FMVSS
207 Safety Standards per
sections S4.2, S4.3.
