- Laser
Cut 10 Gage Steel Plate and Formed to Shape for Accuracy and Strength.
- 160 Steel
Ball Bearing Trace for NO
Vibration and LIFETIME Wear. Not
The European Construction with a Few Nylon Glides or Rollers that
Wear Out.
- 3/8 X 2 inches Machined Center with Center Passage of 1.5 inches for Wire Loom and Plugs.
- Adjustable universal swivel tension
- Available
for Factory and After Market
Seating.
- Tested to
Comply with DOT FMVSS
207 Safety Standards per
sections S4.2, S4.3.
- Easy Installation with
Instructions.
- Manufactured and sold with USA Pricing.
|
 |
|
| |
| |
Your Factory Direct Source for universal seat swivels
.
ALL Swivel Costs Entered Are to Manufacture the Best Product
.
NO Middle Man Profits
.
No Import Duties
.
No Ocean Freight
.
100 Percent Made in the USA
|
| |
UNIVERSAL SWIVEL |
Standard After Market Bolt Pattern |
|
|
- 16 x 16" plate size
- Top And Bottom Bolt Patterns 14x11",14x11.5"
- 1 1/2"" high.
- Approved for seats without air bags and all vehicles over 8.000 lbs GVW.
|
|
| |
|
|
|
|
| |
| |
| |
CUSTOM FACTORY BASE ADAPTER |
After Market Seat |
|
|
- After market seat on factory base
- 8x11" inside bolt pattern
- Custom outside bolt pattern
|
|
| |
|
|
|
|
| |
| |
SEAT SLIDE TRACKS |
OUR RV Seat |
|
|
- After markets seating
- 11" track length
- 7" travel
|
|
| |
|
|
|
|
| |
| |
BOLT IN KIT |
RV Seat Bases |
|
|
- 4 - 1/2"x1 1/2" bolts
- 4 - 2" x 5" under floor
reinforcement plates
- Multiple applications
|
|
| |
|
|
|
|
| |
- Laser
Cut 10 Gage Steel Plate and Formed to Shape for Accuracy and Strength.
- 160 Steel
Ball Bearing Trace for NO
Vibration and LIFETIME Wear. Not
The European Construction with a Few Nylon Glides or Rollers that
Wear Out.
- 3/8 X 2 inches Machined Center with Center Passage of 1.5 inches for Wire Loom and Plugs.
- Adjustable universal swivel tension
- Available
for Factory and After Market
Seating.
- Tested to
Comply with DOT FMVSS
207 Safety Standards per
sections S4.2, S4.3.
- Easy Installation with
Instructions.
- Manufactured and sold with USA Pricing.
|
