- Laser
Cut 10 Gage Steel Plate and Formed to Shape for Accuracy and Strength.
- 160 Steel
Ball Bearing Trace for NO
Vibration and LIFETIME Wear. Not
The European Construction with a Few Nylon Glides or Rollers that
Wear Out.
- 3/8 X 2 inches Machined Center with Center Passage of 1.5 inches for Wire Loom and Plugs.
- Available
for Factory and After Market
Seating.
- Tested to
Comply with DOT FMVSS
207 Safety Standards per
sections S4.2, S4.3.
- Easy Installation with
Instructions.
- Manufactured and sold with USA Pricing.
|
 |
|
Over 52 Years In Seat Manufacturing With Installation Assistance |
Your Factory Direct Source for chevy,gmc seat swivels
.
ALL Swivel Costs Entered Are to Manufacture the Best Product
.
NO Middle Man Profits
.
No Import Duties
.
No Ocean Freight
.
100 Percent Made in the USA
|
SUPERIOR
NEW
DESIGN |
Manufactured Specifically for the 1996-2023 Chevy
With Mount Holes Specific ONLY for Chevy - GMC
NOT Multiple Side Holes
that TAKE AWAY the integrity. |
|
FACTORY SEAT on Factory Base |
|
- Large Wire Pass-Thru Center
- Offset Design Allows Swivel Without Opening Door.
- Top bolt pattern
14 1/4 x 13 1/4"
- Bottom bolt pattern
14 1/4 x 13 1/4"
- Seat raise 1.5"
- Seat offset 1" when
facing forward. 3" facing to the rear.
- Approved for seats without air bags.
|
|
|
|
|
|
|
|
|
|
SUPERIOR
NEW
DESIGN |
Manufactured Specifically for the 1996-2023 Chevy
With Mount Holes Specific ONLY for Chevy - GMC
NOT Multiple Side Holes
that TAKE AWAY the integrity. |
|
|
2
- Large Wire Pass-Thru Center
- Offset Design Allows Swivel Without Opening Door and the Option of an Outside Arm
- Top bolt pattern 14x11"
- Bottom bolt pattern
14 1/4 x 13 1/4"
- Seat raise 1.5"
- Seat offset 1" when
facing forward. 3" facing to the rear.
- Approved for seats without air bags.
|
|
|
|
|
|
|
|
- Laser
Cut 10 Gage Steel Plate and Formed to Shape for Accuracy and Strength.
- 160 Steel
Ball Bearing Trace for NO
Vibration and LIFETIME Wear. Not
The European Construction with a Few Nylon Glides or Rollers that
Wear Out.
- 3/8 X 2 inches Machined Center with Center Passage of 1.5 inches for Wire Loom and Plugs.
- Available
for Factory and After Market
Seating.
- Tested to
Comply with DOT FMVSS
207 Safety Standards per
sections S4.2, S4.3.
- Easy Installation with
Instructions.
- Manufactured and sold with USA Pricing.
|
 |
|