Plasma
Cut 10 Gage Steel Plate and Formed to Shape for Accuracy and Strength.
160 Steel
Ball Bearing Trace for NO
Vibration and LIFETIME Wear. Not
The European Construction with 4 Nylon Glides that
Wear Out.
3/8" X 2" Machined Center with Center Passage of 1.5" for Wire Loom and Plugs.
Available
for Factory and After Market
Seating.
Tested to
Comply with DOT FMVSS
207 Safety Standards per
sections S4.2, S4.3.
30 Minute
Easy Installation with
Instructions.
"Made in
the USA" Pricing.
Over 52 Years In Seat Manufacturing With Installation Assistance
SUPERIOR
NEW
DESIGN
Manufactured Especially for the 2007-2021 SPRINTER
FACTORY SEAT on Factoy Base
Large Wire Pass-Thru Center
Offset Design Allows Swivel Without Opening Door.
Top bolt pattern
16 5/8" X 16 5/8"
Bottom bolt pattern
16 5/8" X 16 5/8"
Seat raise 1.5"
Seat offset 1"
Approved for seats without air bags.
Made to US DOT Standards in the US Base Design.
Seat bases tested to meet FMVSS #207 safety standards per sections S4.2 and S4.3
Easy Bolt in Installation.
SUPERIOR
NEW
DESIGN
Manufactured Especially for the 2007-2021 SPRINTER
OUR SEAT on Factoy Base
2
Offset Desin Allows Swivel Without Opening Door and the Option of an Outside Arm
Large Wire Pass-Thru Center
Top bolt pattern
14 x 11"
Bottom bolt pattern
16 5/8" X 16 5/8"
Seat raise 1.5"
Seat offset 1"
Approved for seats without air bags.
Made to US DOT Standards in the US Base Design.
Seat bases tested to meet FMVSS #207 safety standards per sections S4.2 and S4.3
Easy Bolt in Installation.
SUPERIOR
NEW
DESIGN
Manufactured Especially for the 2001-2006 SPRINTER
FACTORY SEAT on Factoy Base
2
Large Wire Pass-Thru Center
Top bolt pattern
14 7/8 x 16 3/8"
Bottom bolt pattern
14 7/8 x
16 3/8"
Seat raise 1.5".
Approved for seats without air bags.
Made to US DOT Standards in the US Base Design.
Seat bases tested to meet FMVSS #207 safety standards per sections S4.2 and S4.3
Easy Bolt in Installation.
SUPERIOR
NEW
DESIGN
Manufactured Especially for the 2001-2006 SPRINTER
OUR SEAT on Factoy Base
2
Large Wire Pass-Thru Center
Top bolt pattern
14 x 11"
Bottom bolt pattern
14 7/8 x 16 3/8"
Seat raise 1.5"
Seat offset 2" when
facing forward. 3 1/2 " when facing to the rear.
Approved for seats without air bags.
Made to US DOT Standards in the US Base Design.
Seat bases tested to meet FMVSS #207 safety standards per sections S4.2 and S4.3
Easy Bolt in Installation.
Our large variety of van and RV bases offer a broad choice of applications and leave your preferences wide open. We have front seat bases for almost all applications in most vehicles. Center seat bases will with high back seats in vans and low back seats in RV's. 6 way power bases will add the maximum comfort with multiple adjustments. Seating systems manufactured to meet or exceed FMVSS 207 DOT safety standards per sections S4.2 and S4.3.
