- "Position" is a required field.
- "Factory or DVT Seat" is a required field.
- "Vehicle " is a required field.
- "Year" is a required field.
- "" is a required field.
You are here:
CALL US: 800-884-3826
Sale!
Promaster Lowered Base and Swivel
Original price was: $575.00.$499.00Current price is: $499.00.
- Offered 2 Inch or 4 Inch lowered base on OEM or Our Seat!
- 3 bolt set in each slide.
- Top Bolt Pattern
16 1/8 x 13 1/4 & 15 1/4″” - Includes Belt Attachment
- Made to US DOT Standards in the
US Base Design. - Seat bases tested to meet
FMVSS #207 safety standards
per sections S4.2 and S4.3 - Easy Bolt in Installation.
Lowered base and swivel for stock Promaster Seats.
The swivel is 1 5/8″
2″ lowered will be a 4″ drop base with swivel on top
4″ Lowered will be a 6″ drop base with swivel on top
You may also like
Quick Disconnect Bolt Set-Up
$99.004 or 6 Quick Disconnect Bolt Set-Up
Comes with Bolt, Flat Washer, Lock Washer, Nut, Floor Plate, and Smaller Bolt for Quick Discconect
Transit Stock Height Base and Swivel
$628.00| Over 55 Years In Seat Manufacturing With Installation Assistance |
| Your Factory Direct Source for transit seat swivels . ALL Swivel Costs Entered Are to Manufacture the Best Product . NO Middle Man Profits . No Import Duties . No Ocean Freight . 100 Percent Made in the USA |
Sale!
Transit 2 Inch Lowered Base, OEM or Our Seat
Original price was: $349.00.$299.00Current price is: $299.00.- 2 Inch Lower Base
- Includes Belt Attachment
- Made to US DOT Standards in the US Base Design.
- Seat bases tested to meet FMVSS #207 safety standards per sections S4.2 and S4.3
- Easy Bolt in Installation.
Sale!
Promaster Power Stack and Swivel, OEM or Our Seat
Original price was: $1,050.00.$849.00Current price is: $849.00.- Stock Height, or 2" Lower
- 3 bolt set in each slide.
- Top Bolt Pattern 16 1/8 x 13 1/4 & 15 1/4""
- Includes Belt Attachment
- Made to US DOT Standards in the US Base Design.
- Seat bases tested to meet FMVSS #207 safety standards per sections S4.2 and S4.3
- Easy Bolt in Installation.
Promaster Power Stack, Stock Height or 2" Lowered
$650.00- 3 bolt set in each slide.
- Top Bolt Pattern 16 1/8 x 13 1/4 & 15 1/4""
- Includes Belt Attachment
- Made to US DOT Standards in the US Base Design.
- Seat bases tested to meet FMVSS #207 safety standards per sections S4.2 and S4.3
- Easy Bolt in Installation.
Sale!
Promaster Lowered Bases, 2",4",6"
Original price was: $350.00.$299.00Current price is: $299.00.**IF USING A SWIVEL ON DRIVER SIDE, ONLY TWO INCH DROP WILL WORK WITH A SWIVEL. UNLESS YOUR HAVE AN ELECTRONIC E-BRAKE**
| Over 52 Years In Seat Manufacturing With Installation Assistance | |
| Your Factory Direct Source for promaster seat swivels . ALL Swivel Costs Entered Are to Manufacture the Best Product . NO Middle Man Profits . No Import Duties . No Ocean Freight . 100 Percent Made in the USA |
96-2021 GM CLASS B,C Power Swivel Stack After Market Seat
$688.00- Extended lead time if not ordered with seats.
- Complete bolt in package with riser and double seat belt bar.
- Includes 360 degree swivel plate
- Requires a ground wire attachment and 12-V power from the fuse panel.
- No available for 2007+ driver with large fuse panel under seat.
Class A Power Swivel Stack
$600.00- Complete bolt in package with riser,swivel plate and double seat belt bar.
- Height front:10.75-12.25"
- Height rear:9.25-10.75"
- Top bolt pattern 14w x 7.5, 9.5, 10.25, 11, 12, 13, 14.5"
- Bottom bolts 8w x 8" and 8w x 10"
Sale!
6-Way Power Base
Original price was: $458.00.$389.00Current price is: $389.00.- After market power unit. (does not dierctly replace OEM power units)
- 6 Way power. Front up-down, back up-down, slide back-forth.
- 14" wide bolt pattern (can be re-drilled from 13 1/4 to 14 3/4")
- Multiple front to back bolt patterns. (Others can be drilled.)
- Requires one hot wire to fuse panel.
- Weight 24 lbs.
Sprinter 6-Way Power Base After Marke Seat
$718.00These Sprinter front seat bases are direct replacement for the stock 2007 and newer Mercedes Sprinter Van front driver and passenger seatin The extensive electronics under the driver base does not allow enough area for the swivel. They are a very high quality and meet or exceed all federal Deparment of Transportaion safety regulations and standards.
Sale!
Sprinter 2 Inch Lower Base, Factory or Our Seat
Original price was: $375.00.$325.00Current price is: $325.00.- Laser Cut 10 Gage Steel Plate and Formed to Shape for Accuracy and Strength.
- 160 Steel Ball Bearing Trace for NO Vibration and LIFETIME Wear. Not The European Construction with 4 Nylon Glides that Wear Out.
- 3/8" X 2" Machined Center with Center Passage of 1.5" for Wire Loom and Plugs.
- Available for Factory and After Market Seating.
- Tested to Comply with DOT FMVSS 207 Safety Standards per sections S4.2, S4.3.
- 30 Minute Easy Installation with Instructions.
- "Made in the USA" Pricing.